Spyderco Bushcraft становится раритетом из-за брака древесин
- __Z V I R__
- Найфоман-эксперт
- Сообщения: 3410
- Зарегистрирован: 17 сен 2007, 17:55
- Откуда: Киев
- Поблагодарили: 1 раз
- Контактная информация:
Spyderco Bushcraft становится раритетом из-за брака древесин
сэл на оффоруме сделал заявление про этот нож:
Spyderco Bushcraft UK - announcement
I regret to inform you that the Bushcraft UK models just introduced by Spyderco are no longer shipping.
The designers, Chris Claycomb and the chaps at Bushcraft UK did an excellent job on the design. Our maker did an excellent job on manufacture. The problem it turns out is in the wood used for the handle.
The wood that I selected from our USA source was Spalted Maple. It was the most striking wood that the supplier had available. It was my understanding that the material was stabilized and would not shrink once formed. We’d had some problems with some of the prototypes shrinking so I was sensitive to the issue.
We were assured that the wood was stabilized and would not be a problem. The wood was custom cut and prepared in the US and sent to our maker in Taiwan.
We’d been working on the project for a couple of years and really wanted a top drawer piece. When the shipment arrived, we QC’d the run, numbered the collectors and began shipping parts.
A short while later, we noticed, and we had complaints of the wooden handles shrinking and cracking. We spoke with our supplier, who was quite surprised. They said that shouldn’t have happened. They said we should soak the knives in boiled linseed oil and it would solve the problem. We thought we could just wipe off the linseed oil.
After soaking the entire shipment in the linseed oil for more than a week. We still experienced some cracking in some of the pieces. We continued to ship the pieces that appeared ok, but we wrapped them in plastic and left linseed oil on the handle for additional protection.
Then we learned that the linseed oil didn’t easily wipe off. After trying a number of methods, the only thing we found that could actually remove the linseed oil is acetone. Not fun stuff to work with.
At this time, we don’t yet know what we are going to do with the 1000+ finished pieces that will more than likely all crack. The supplier can’t help us, other than to replace the wood. The maker is not responsible as they did a good job.
I would like to extend my apologies to Chris Calycomb and Bushcraft UK, A bummer for sure after all of their efforts.
I would like to extend my apologies to our customers, especially those that have been waiting for the model.
I would like to extend my apologies to our crew that had to mess with all of the attempted “fixes”.
We are considering making another run, once we find a wood that will in fact not shrink.
sal
т.е. отгрузка бушкрафтов прекращена из-за того что древесина на рукояти плохо себя ведёт - ссыхается и трескается. да-да, стабилизированная древесина. сэл сам в шоке, жутко перед всеми извиняется, говорит что все отработали на ура (крис клейкомб и фабрика-производитель), но подвёл поставщик дерева - американская контора, которая сделала большиеудивлённые глаза и посоветовала пропитывать льнянкой. да-да, стабилизированную древесину. короче, после того как спай найдёт нормальную древесину, они сделают новый выпуск.
Spyderco Bushcraft UK - announcement
I regret to inform you that the Bushcraft UK models just introduced by Spyderco are no longer shipping.
The designers, Chris Claycomb and the chaps at Bushcraft UK did an excellent job on the design. Our maker did an excellent job on manufacture. The problem it turns out is in the wood used for the handle.
The wood that I selected from our USA source was Spalted Maple. It was the most striking wood that the supplier had available. It was my understanding that the material was stabilized and would not shrink once formed. We’d had some problems with some of the prototypes shrinking so I was sensitive to the issue.
We were assured that the wood was stabilized and would not be a problem. The wood was custom cut and prepared in the US and sent to our maker in Taiwan.
We’d been working on the project for a couple of years and really wanted a top drawer piece. When the shipment arrived, we QC’d the run, numbered the collectors and began shipping parts.
A short while later, we noticed, and we had complaints of the wooden handles shrinking and cracking. We spoke with our supplier, who was quite surprised. They said that shouldn’t have happened. They said we should soak the knives in boiled linseed oil and it would solve the problem. We thought we could just wipe off the linseed oil.
After soaking the entire shipment in the linseed oil for more than a week. We still experienced some cracking in some of the pieces. We continued to ship the pieces that appeared ok, but we wrapped them in plastic and left linseed oil on the handle for additional protection.
Then we learned that the linseed oil didn’t easily wipe off. After trying a number of methods, the only thing we found that could actually remove the linseed oil is acetone. Not fun stuff to work with.
At this time, we don’t yet know what we are going to do with the 1000+ finished pieces that will more than likely all crack. The supplier can’t help us, other than to replace the wood. The maker is not responsible as they did a good job.
I would like to extend my apologies to Chris Calycomb and Bushcraft UK, A bummer for sure after all of their efforts.
I would like to extend my apologies to our customers, especially those that have been waiting for the model.
I would like to extend my apologies to our crew that had to mess with all of the attempted “fixes”.
We are considering making another run, once we find a wood that will in fact not shrink.
sal
т.е. отгрузка бушкрафтов прекращена из-за того что древесина на рукояти плохо себя ведёт - ссыхается и трескается. да-да, стабилизированная древесина. сэл сам в шоке, жутко перед всеми извиняется, говорит что все отработали на ура (крис клейкомб и фабрика-производитель), но подвёл поставщик дерева - американская контора, которая сделала большиеудивлённые глаза и посоветовала пропитывать льнянкой. да-да, стабилизированную древесину. короче, после того как спай найдёт нормальную древесину, они сделают новый выпуск.
Последний раз редактировалось __Z V I R__ 25 дек 2009, 09:10, всего редактировалось 1 раз.
- __Z V I R__
- Найфоман-эксперт
- Сообщения: 3410
- Зарегистрирован: 17 сен 2007, 17:55
- Откуда: Киев
- Поблагодарили: 1 раз
- Контактная информация:
Re: Spyderco Bushcraft становится раритетом
как снизит цену, закажут другие ножны, сделают из другой стали и деревяхи - вот тогда можно будет брать
- __Z V I R__
- Найфоман-эксперт
- Сообщения: 3410
- Зарегистрирован: 17 сен 2007, 17:55
- Откуда: Киев
- Поблагодарили: 1 раз
- Контактная информация:
- Aleksandr Afonchenko
- Afonchenko Knives
- Сообщения: 9630
- Зарегистрирован: 18 сен 2007, 00:39
- Откуда: Lozova
- Поблагодарили: 25 раз
- __Z V I R__
- Найфоман-эксперт
- Сообщения: 3410
- Зарегистрирован: 17 сен 2007, 17:55
- Откуда: Киев
- Поблагодарили: 1 раз
- Контактная информация:
Re: Spyderco Bushcraft становится раритетом
снизили, причём - больше чем в 2 раза.McS писал(а):Пусть лучше цену в 2 раза снизят
короче, раритетом они так и не стали и не станут - потому что спай решил распродать через свой сайт остатки по цене в 90 баксов.
бла-бла, постащик стабилизированной древесины лопухнулся, мы тоже посыпаем голову пеплом, жутко извиняемся, и чтоб не морочить голову решили распродать всю партию по 90 баксов с ножнами под видом отбракованной продукции через оффсайт. можете заполнить трещины эпоксидкой или полностью переделать рукоять, если руки стоят не криво.As most of you know, our Bushcraft UK collaboration had difficulties. The short story is that the stabilized wood that we used, a very beautiful "Spalted Maple", for the handle ended up not being stabilized and we experienced cracking on the handles of 95% of the run. The wood vendor assumes no liability other than to replace the raw wood.
As a result of this dilemma, Spyderco has decided to sell the pieces as 2nds through our web-site. The price of the knife with leather sheath is $90.
Some have thought to replace the handle, but I believe that removing the handle and reproducing the excellent ergonomics of the original design would be difficult to impossible for most. My suggestion, for those that get one, would be to fill the cracks, polish the handle and enjoy using the piece. Of course the knife is also functional with the cracks as they are.
Our apologies to our customers for the problem encountered which forces this change of direction.
в этой теме можно посмотреть картинки как трескается рукоять (там с 4-й странички и дальше), а вот тут заказать сам нож, если не страшно
Re: Spyderco Bushcraft становится раритетом из-за брака древесин
А всетаки спай жжет! Изначальная цена была 300 долларов. И это при обычной "напильниковой" стали и тайваньском! (только сейчас заметил ) производстве то? А кто-то говорил, что бенч на свои целиком американские ножи цнены высокие назначают
Нельзя быть слишком богатым, слишком здоровым и слишком вооруженным (с)
- anri
- Найфоман
- Сообщения: 820
- Зарегистрирован: 23 дек 2007, 13:08
- Откуда: Измаил
- Поблагодарили: 1 раз
Re: Spyderco Bushcraft становится раритетом из-за брака древесин
а что, цена в 90$ - это очень даже не плохо
- __Z V I R__
- Найфоман-эксперт
- Сообщения: 3410
- Зарегистрирован: 17 сен 2007, 17:55
- Откуда: Киев
- Поблагодарили: 1 раз
- Контактная информация:
Re: Spyderco Bushcraft становится раритетом из-за брака древесин
я тож сначала так подумал. потом посмотрел на треснувшие рукояти и понял, что слишком уж они разлазятсяanri писал(а):а что, цена в 90$ - это очень даже не плохо
Re: Spyderco Bushcraft становится раритетом из-за брака древесин
Друзья, да вы чаво, смеетесь? 90$ за полуфабрикат ножа (полоса со "спусками") из заурядной инструменталки, которой цена "рупь - ведро! в базарный день"????
Это уже спайдерофилия какая-то
Как говорил "последний бойскаут": шесть сотен за штаны? и ты их носишь?
Это уже спайдерофилия какая-то
Как говорил "последний бойскаут": шесть сотен за штаны? и ты их носишь?
- __Z V I R__
- Найфоман-эксперт
- Сообщения: 3410
- Зарегистрирован: 17 сен 2007, 17:55
- Откуда: Киев
- Поблагодарили: 1 раз
- Контактная информация:
Re: Spyderco Bushcraft становится раритетом из-за брака древесин
блин, недавно искал этот фильм так и не нашёл - хотел пересмотреть сцену с "дай прикурить"Как говорил "последний бойскаут": шесть сотен за штаны? и ты их носишь?
надо с другой стороны смотреть: ой, блин, оно ж 300 баксов стоило, а сейчас всего 90 - дайте три!!!Друзья, да вы чаво, смеетесь? 90$ за полуфабрикат ножа (полоса со "спусками") из заурядной инструменталки, которой цена "рупь - ведро! в базарный день"????
14 сообщений
• Страница 1 из 1